Pages

Pages

26 August 2017

Answer key to UCEED 2017 Previous paper


You are here Solutions >> UCEED 2017 solution


You may download UCEED 2017 question paper here 

 
Detailed explanation to some of the design aptitude questions of UCEED 2017 are available in the below set of videos







Answers for UCEED 2017 Exam paper 


1) 12

Out of the all 6 surfaces of the given cube, it is given that three surfaces are green while the rest three are orange. 
We are interested in finding the edges which have contact with one orange and one green surfaces,

The following image shows for one corner (top). As shown, although it has four small cubes at the top, the two edge cubes on either side will have two surfaces having a single color and another surface having another color, so they shouldn't be counted. So, for one edge, we have 2 cubes.


Now, the trick is to count the no. of such corners possible. Below figure shows all possible corners that lead to the required. All the invisible surfaces in the below image are green color. 

As can be seen, we have 6 edges, thus counting to 6*2 = 12 cubes



2) 25

Below figure shows the reflected image. The problem can be split to counting of no. of squares and the no. of non-squares (but rectangles).

Below two images gives the situation of no. of squares, which will ocunt to 6 + 4 = 10 




Below four images shows no. of non rectangles which will count to 5 + 5 + 3+ 2 = 15


Total = 10+15 = 25

3) 7

In the below figure, I've numbered each parts from 1 to 5.


In the below image, I've arranged them (based on by matching the zig zag tooth of each part, starting from part 1). If you observe zig zag tooths for part 1, has 9 depressions and a close observation of part 3, reveals that that too has 9 projections on its left side. Like wise matching each part, I ended up in the below image, now count the no. of outer surfaces. 



4) 28

Below image highlights the possible different symbols


5) 11

In the below image, I've underlined the different identified fonts


6) 7669

if we see the difference of the purchase, it will look something like below

(301-151)=150
(601-301)=300 
(1201-601)=600
(2401-1201)=1200
(4801-2401) = 2400

so, the increase in purchase range in each step is 
150, 300 (150*2), 600 (300*2), 1200 (600*2), 2400 (1200*2),

They are in GP.

150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, ....

So, our required purchase amount false in 9th step, because at every step, max is double the difference, for example for the first step, max ~300 which is 150*2

checking the discount,

19= 30-11
49= 60-11, 
109=120-11, 
229=240-11,
469=480-11, 
the next five terms will be
480*2-11 
960*2-11
1920*2-11
3840*2-11 = 7669  

7) 1.5

considering, 
one parrot as x
one fish as y
one elephant as z

then as per the given equation

x+2y=4z (1)
2x+z=y+x (2)

we need 
z = k*x
where k is the number of parrots, so we need toe eliminate y as far as possible

from (2)
2x-x+z=y
x+z=y (3)

putting (3) in (1) instead of y

x+2*(x+z) = 4z
3x=4z-2z
3x=2z
z=3/2*x = 1.5*x

eek :D, 
that's one and half parrot! 
one parrot and half more parrot! I can't see the seond parrot being halved, Hopefully, next time UCEED examiners won't be this cruel :D (just kidding)

8) 11

Following are the alphabets that can be flipped on horizontal axis

B,C,D,E,H,I,K,M,O,W,X

9) 8

I've numbered the steps to be taken by knight which is possible the least no.



10) 8

Below picture shows the numbering that I followed. 


Note that although there are several lines on each fan wing, but when the fan rotates, all the patterns appear to be following a circular line. For example, consider the pattern 5 in wing C, as you can see, it has a wave with several dots on the top and bottom of the pattern. No doubt, if they are rotated, they will result in three circular lines. But, observe the pattern 5 in wing A. The pattern is slanted from a to b. So if the wing is rotated, then that will look like a single circle of thickness ab. This thickness (ab) covers the gaps of between the three circles formed by the rotation of pattern 5 of wing C, and so the result will be only one circle. This also covers the pattern 5 in wing B. Similarly you can find the mixing and non mixing of other patterns too.

11) 17

The letters that can be visualized from figure A are 

B, C, D, E, F, G, H, L, P

So, all together, we can visualize 9

So, no. of alphabets that cannot be overlapped to fit within figure figure1 is 26-9=17 


12) 10 

No. of gears on A = 11
No. of gears on B = 8

Since second gear has 8 no. of tooth and considering the complete 8 no. of gear movement as 1 turn, we mark on A whenever 8 gears are counted just like in the first image of the below image. Since gear A turns clockwise, we need to count the gears in the counter clockwise direction, which is the direction in which gear B mesh with A. Note the location of the 8th gear teeth. 
In the next turn start from the next teeth of the marked gear (as shown in the second image) and count again 8 gears. Repeat this until the 8th gear is on the red mark on A.



Note: I just showed images for easy understanding, not to scare you :P You can use ur pen or pencil or even your finger to count in counter clockwise and keep counting each 8 gears as 1 turn. Repeat counting mentally until the red mark is reached. 

13) 10

below image shows the triangles marked in colors, just to differentiate from each other. I wish the question could have been much clear anyway :P


14) 3

Given, at each second, the numbered disc rotates two numbers in anti-clockwise direction while the cut-out disc rotates 1 no. in clockwise. So, relatively, for every sec, the numbered disc moves 2+1 = 3no.s, assuming that the cut-out disc is held stationary.


So, after 5 secs, the no. should have been moved 3*5 = 15 times in anti clockwise direction. So, taking no. 8 as the start/refernce, move anticlockwise 15 times which will give the required no. which will appear in the pentagon after 5 secs. 

15) 0.715

First, find the area of the black area, then find how much area it is occupying with respect to the total area, that ratio will give us the probability 

Total area = 2*2 = 4

Area of the white circle without black square in the center 
=  (PI/4)*sqyuare_root(dia)
= (3.14/4)*4 = 3.14

to find the side of the inside sqaure, not that one of the hypotenuses of the triangle is itself the diameter of the circle as shown in the below image. saying the side of the square as a and using the pythogerous theorem


square(a) + square(a) = square(d) = 4

2*square(a) = 4
square(a) = 2
a = square_root(2)
So, area of the inner square = a*a = square_root(a)*square_root(a) = 2

So, finally, area of the black part = total area - area of circle + area of inner square = 4-3.14+2 = 2.86

The required probability is = area of black divided by total area = 2.86/4 = 0.715

16) 0.625

Total no. of summing combinations possible are 4*4 = 16
Total no. of combinations for the sum is 
considering only 5 in the first circle and matching with all the four no's in the second circle
(5,2), (5,3), (5,4), (5,5)
doing the same for the other three no's 2,3 and 4, we get the combinations
(2,2), (2,3), (2,4), (2,5), (3,2), (3,3), (3,4), (3,5), (4,2), (4,3), (4,4), (4,5)

out of all the combinations, the combinations which add up to 7 or more are
(5,2), (5,3), (5,4), (5,5)
(4,3), (4,4), (4,5)
(3,4), (3,5)
(2,5)

which are 4+3+2+1 = 10

So, the probability is 10/16 = 5/8 = 0.625

17) 36
  
no. of surfaces from left = 7
no. of surfaces from front = 7
no. of surfaces from right = 5
no. of surfaces from back = 5
no. of surfaces from top = 7  
no. of surfaces from bottom = 5

For a clear understanding of how to count - check this link

For your understanding, I've shaded the first solid so that you can get a clarity of which part belongs to solid and which isn't. 



18) 55

Since they reach their home 10 mins early, it means the time saved by her husband to travel the distance (equal to the distance walked by her) to and fro, should be 10 mins, 

So, the one way travel time for her husband is  5 mins, but she started 1 hour ago to reach the spot. So, time taken by her = 60 min - 5 mins = 55 mins

Further explanation:


Above image shows the situation. It is clear that Sharmila's husband pick up her at the bust stand exactly at 6PM. Let's say it takes 't' mins for the car ride to reach their home, everyday, from the bus stop. So, they will reach home everyday t mins after 6 every day. This is when they start at 6PM at the bus stop. 

Now, today, since Sharmila had already started walking and let's assume that her husband pick up her at say C. This time is going to be lesser than 6PM. That's because, if it was 6, her husband would have already been reached to the bus stop. So, they met before 6PM. Since they need 't' mins to reach home from bus stop, her husband needs the same 't' mins usually to reach the bus stop from the home (during  the on ward travel). So, as he reach C and saw her wife there, he had saved time to reach the bus stop (from C to bus stop) and also he had saved the time to travel from bus stop to C, which whole together was given as 10 mins. So, half of the time (10/2 = 5 mins) is needed for her husband to travel from C to bus stop (since the total saved time due to onward travel from C to bus stop and also the return from bus stop to C is 10 mins). So, they actually met 5 mins before 6PM, which is 5.55PM. Since Sharmila started at 5PM she travelled 55 mins before she saw her husband.



19) 15

Below image shows the rules given by 1,2,3,4,5
and the below table shows the possible arrangement. 


20) 10

AB is equal to the radius of the sphere which is 10m

Explanation: 
If you see the second image below, given a cuboid or any box structure, if you join the opposite corners (usually called as the diagonals) then they are going to be of the same length. Which means in the second below image, diagonal OC = diagonal AB.
Now, if you check the first image below, the given red line joining A and B will be of the same length as the other diagonal OC. Since O is the center of the sphere and OC is nothing but the radius of the sphere, AB = OC = R (radius of the sphere)





21) A, C

22) B, C, D

The following are non effective considering rural illiterate scenario

I, II, VII 

23) B, D

24) C, D

25) B, D

26) A, B

27) A, B, C, D


28) A, B, D
By careful observation

29) A, B, C, D
All the patterns in the option can be used. 

30) C, D

Below figure shows the impossible options


31) A, B, C

Below image shows the explanation with numbers marked, only D doesn't follow a pattern.


32) B, C

33) A, C, D

34) A, B

35) A, C, D

36) A,C,D

Except for B, all the remaining parts are needed.

37) B, C, D

The + and - should be aligned in the same direction if there are multiple batteries and they are connected in parallel. So, clearly circuit S will not glow. 

Batteries in series (one next to another) as shown in Q, will provide double the energy and so they should glow more, Unlike in parallel batteries which provide only half the energy each. So, R is same as P since parallel battery of 2 no's equilvalent to one batter as in P.

38) A, D

Numbering the different colors as shown in the below image.



I've marked the arrangement which is possible. They are obtained by folding the given unfolded shape into the paper, rather than folding up.

39) B, D

It's obvious since they said that when the force was removed, it gets back to its usual position which will happen only when there is some springing action. A and B, doesn't provide spring support, while B is similar to safety pin design and D is obviously a springer model, both of which obviously provide the return action.

40) A, C


As you can observe in each column, the no. of circles in each box decreases by 1 from top box to the bottom box and the no. of triangles increases by 1 no. in each box. Below image shows the explanation for the first column (three boxes), likewise if we do the same thing for the last colum, we note that the top box has 5 circles, and 1 triangle and the bottom box (on the same column) has (5-1)=4 circles and (1+1)=2 triangles
So, the final box should have
4-1=3 circles and
2+1=3 traingles

41) C, D

42) A, C

Exposure is same in all the three cases and the first thing varying is the focus. Image from moving camera should have equal effect on all the parts of the given photo, while aperture size will have effect on parts of the given image.

43) A, C, D

44) B, C
Both suits the purpose. 

45) A, C
Not sure, I just googled it

46) D

47) A

48) A

Clearly, the emoji move left to right such that its tongue is out alternatives. So, the emoji in the ques mark should have tongue out. And the two kind of emojis (with tongue out, alternates in each row.

49) B

Just unfold R, in the reverse direction, marking all the patterns as shown in the below image


50) D

Definitely, S should come next to P, because by matching the top circular white space in both. Only option B and D have that. Matching P, left side and R right surface, it gives a correct match.

51) C

Observe the bike, alternates in direction everytime - left and right. So it should be left. The pencil increase in size in every step. Sandals pair move in anti clockwise direction, slightly more than 90 degrees in each step. Clock color, changes according to elementary color pattern, orange-yelloe-green-blue

52) A

Clearly, the alphabet no, is equal to the no. of sides of the given shape.
Like the first triangle has 3 sides and the alphabet C, appears in 3rd number in the alphabets list. Similarly F = 6, H=8, and the fourth pattern has two shapes, one 8 sided and one four sided, so HD, 
Last pattern has only one shape which has 8 sides, and so It should be H again.

53) B

The logic for this is involved. But, let me put this way.

oberving the clocks, we see that the second and clock has remained in the same position as firsts. So, it is eithr making o progress or 12 hrs advancing. 

the third clock shows 3'O clock which mean it has advanced 6 hrs from the second clock. And he fifth clock shows 4.5 hrs

So, putting them as series, we see

12, 6, ?, 1.5 

6 can be looked as 12/2
similarly when we look ? as 6/2 (=3), then we see that ?/2 which is 3/2 = 1.5, which agrees with the last clock. SO ? should be three hours from the previous position

previous clock (third clock) is 3'O clock so, the answer should be 3+3 = 6'O clock

54) B

In the below image, I've marked some numbers, a line and stars. The red line denotes the center of rotation. Each orange dots to the right of the center red line X-X when rotated 180 degrees anti clockwise in the top view, will form semi circles on the top.  


Similarly, each orange dots lying on the left of the center red line X-X when rotated 180 degrees anti clockwise in the top view, will form semi circles on the bottom.

Also the numbers dots will hence form a circle, like marked in the image, number 1 on the right of X-X axis will form a semi circle on the top, while number 1 on the left of X-X axis will form a semi circle on the bottom, both together will form a circle. All the numbered dots will hence form circles, only the blue star on the right side of X-X, will make a semi circle o the top, while the blue star on the left side of X-X will make the outer semi circle o the bottom as shown in option B

55) A

A fits figure 1, when A is made upside down and matched with figure 1.

56) B

Here, I'm trying to give a detailed explanation for your easy understanding. 

Let 
mass of cuboid = x
mass of sphere = y
mass of cube = z
mass of cone = p

Given,

x+y = z+p (1)
x = y+p (2)
y = 2 (3)

using (3) in (2)
x = 2+p
p = x-2 (4)

using (4) and (3) in (1)
x+2 = z+x-2

which gives
z = 4 

also given that
2kg mass is equivalent to 62.5 cubic cm of volume,
so, z=4 kg mass is equivalent to 62.5*2 = 125 cubic cm

Now, the size of the cube can be obtained by equalling the volume of cube to 125

a*a*a = 125
a = 5,

also given that length of the cube doubles when exposed to air.

So, now the size of the cue is 10X10X10

Let K no. of cubes are required 
volume of the tank = K*voume of each cube
50*50*50 = K*10*10*10
so,
5*5*5 = k
k = 125

57) A

Right side view says that there's the white strip to the left of the top view, 

Left side view says that there is no white strip on the top portion of the left side view and so in the top view also, there shouldn't be any white strip to its left. 

Similarly, front side view shows that there's the white strip in The mid of the top and so in the top view, the bottom part of it should show the strip

58) B

Blue strip in all the strips are in contact with 3 other color strips except in B which has only 2 contacts.

Similarly violet color in the given pattern are in contact with three other colored pattern, except in B which shows 4 contacts.

So, B should be odd.

59) B

Based on the size of the red counter, and noting the curves of 'b' in the questions, P in option B seems more reasonable.

60) D

By observation

61) D

Current time in the question is 1.40

adding 8.45, we have 10.25, which will look like as shown below.

It, when rotated 270 degree, will like the one shown below

62) B

given 10% is one lakh in 2001,
so, 100% is ten lakhs in 2001
Population in 2011 is 10% increased. So, the total population is 11 lakhs.

Percentage of public vehicles = (5 lakhs/11 lakhs)*100 = 45-46%
So, the percentage of private vehicles = (2 lakhs/11 lakhs)*100 = 18%

63) C

64) B

65) A
  
i. If we rotate the pattern 18 degree, we will get the pattern as shown in option A

ii. If we flip horizontally, then the pattern will look like B

iii. If we rotate the pattern in ii by 180 degrees, we will get a pattern as shown in D

iV. If we flip the pattern in iii, we get pattern shown in A

66) C

Q rotates anti clockwise, R roates clockwise, S rotates counter closkwise, T rotates clockwise and U rotates counter-clockwise.

67) D

68) A

69) B

70) C

71) D

72) C

73) B

Below image shows the partition


74) C

When two bolts mesh, they should rotate in opposite direction. So, since the two bolts are rotating in the same direction, they will remain the same and will not move

75) A

Cutting initi start at X, and so the strength should be more at that point

76) B

Below image, I've marked the symbol.


77) A

Below image shows the pattern.


78) C

79) B

A pin hole camera will capture the surface upside down and, right to left and vice versa.

80) D

81) C

82) C

Below image shows the possible path, starting from idi



83) D

84) C

C's top abd bottom surface persepctive are not in line with the rest 1 point persepctive

85) C



117 comments:

  1. Dear Bhanuchander, for Question no 11, the alphabets that can be overlapped are C,D,E,F,G,H,K,L,P - 9 letters only. B and R cannot be overlapped if observed carefully. (MISTRUST THE OBVIOUS)

    ReplyDelete
    Replies
    1. while I agree that R might not be correct, but K is CORRECT since K in figure 1, assumes that it has gap between vertical line and the two diverging lines forming k, while in figure 2, there is no space between the vertical line and the other two slant lines.
      I agree with you, but obvious and common sense sometimes out beats the so called intelligence!
      Thank you sir for bringing this up.

      Delete
    2. Sir I m able to come up with 11 letters that can be overlapped B,C,D,E,F, G, H, J,L,P, R.PLZ TELL Where m I wrong?how Cum v r not considering j and r?

      Delete
    3. J is not possible since the curved u bend at the bottom is missing in the given figure (A). If you closely observe it, u can spot the diff.
      Even R doesn't seem to overlap, it's hard to write it, put if u see the R alphabet given, assuming R is formed using three strokes - straight vertically up, curve, and then slant line, then from the transaction of second to third stroke, between the curve and the slant line, notice the gap between the slant line and the vertical straight line. This gap seems missing in the given overlapped image.

      Delete
  2. Thanks bhanu sir...u r very helpful

    ReplyDelete
  3. Sir isn't there any mathematical concept which can be used in ques 12..?

    ReplyDelete
    Replies
    1. i don't see any. If u come up with any, pl update.

      Delete
    2. Yes I think there is a method:-
      1) The bigger gear can can spin 11 times so that the red arrow can come to its original position.
      2) The smaller gear takes 8 turns to come back to its original position.
      3) The last step is that when b completes 1 rotation the a gear will be 3 lesser that the original position do the some until they meet together.

      Delete
  4. Sir,for question 14 I dnt understand how we assume the cut out disc to be stationary

    ReplyDelete
    Replies
    1. there's a concept in physics n maths called 'relative speed' in that if say two people move in opposite direction, 1km each per min, then in a min each would have moved 1 min ion the opposite direction, making the distance between them 2, this 2 km gap is called relative distrace, likewise for the disc system if the bottom is rotatin in one direction and the top part in reverse direction then for each unit of time, we need to add the amount moved by the both parts to get the relative distance between them,

      Delete
  5. Sir,For Q.no. 76 even C option is possible!(in the 1st row). tq

    ReplyDelete
    Replies
    1. I believe even option A for last column last row and option D for second column last row

      Delete
  6. Sir can you please explain the 2nd question. Why should we count squares since we are asked to count rectangles.

    ReplyDelete
  7. Sir in q58 among all the 4 figs only in optionD,green is red on contact with yellow strip. In others it is white.It makes option D odd.please tell.

    ReplyDelete
    Replies
    1. ya, in one way, what u said fits. Seems like the ques had several ans or we're not spotting their actual odd thing. Lets see for any other comments

      Delete
  8. Sir, In ques number 2 when its only asked for number of rectangles in the resultant figure then why are we adding up the number of squares?

    ReplyDelete
    Replies
    1. square is a special kind of rectangle if i haven't mistaken!

      Delete
  9. ans no 13 is correctable ,how can i send correct answer figure ?

    ReplyDelete
    Replies
    1. u can share it thru drive link so that even others can chk them. thank u

      Delete
  10. As per answer key in q22 I don't understand the use of printed booklet for tribes.can u plz explain how?

    ReplyDelete
    Replies
    1. That's very obvious, since the women are from community with little exposure to the current. They would get news from word of mouth or through the other sources which is most likely hot them and those sources are news papers, TV, awareness campaign and distribution of booklets of even news paper with visuals or even explanations so that they would understand that.

      Delete
    2. But I believe considering them as tribes we can't expect them to read booklets?

      Delete
    3. that is exactly what i thought, even though posters can help but what about booklets? I mean since their are illiterate how will they read it?

      Delete
  11. for question no. 17 the official answer key gives the answer as 0.7-0.71

    ReplyDelete
  12. Sir can you explain question 79. ?

    ReplyDelete
  13. Sir, for 16th question I got the same answer as you did, i.e, 0.625 . But according to the final answer key the answer is 0.7-0.71 . What should I do?

    ReplyDelete
    Replies
    1. The are of the first disc is uneven so you need to take into consideration the area. I got this answer correct ��

      Delete
    2. You are right. I got the answer too. Thank you.

      Delete
  14. Sir, for question 17, the probability that 5 or 4 would come up on the first disc is more than two or three . Shouldn't we consider that?

    ReplyDelete
    Replies
    1. well, yes, u have a valid point. Didn't thought about it. Will correct in free time. Thanks.

      Delete
    2. it should be 7(1/3*1/4)+3(1/6*1/4)
      sir you should definitely make this correction as your solution is very misleading.

      Delete
  15. sir in question no. 2 why you have counted squares?

    ReplyDelete
    Replies
    1. a rectangle might not fall under the category if square but a square can be considered as a form of rectangle. am i wrong?

      Delete
  16. Sir in Qno. 8 am to me answer is A,H,I,M,O,T,U,V,W,Y,X

    ReplyDelete
    Replies
    1. i think u didn't understood the ques properly. The ques is when we flip the alphabets on horizontal axis, how many alphabets will still be alphabets in the same font. How can 'A' be possible. Try once again bro

      Delete
  17. Sir!for 11th question the alphabets that can be overlapped are BDEFHKLPR

    ReplyDelete
  18. bhanu sir i m board class and also preparing for uceed and nid ..plz help me to manage between my studys and nid and uceed prepration

    ReplyDelete
    Replies
    1. putting aside the subjective part of NID, You can spare a minimum of 1 hr a day for both uceed or nid given that exams r near. Or you can chose to spend some hours in the weekend, like 4hrs on saturday n sunday. Also, make a priority list and try to cover them first so that u can be in safe side. For NID part B, regardless of ur sketch level, try to practice at least once in a week, attempting mostly on most relevant sketches, not going randomly. The better place is always start with prev. questions form NID official paper and then try most similar ques. When ur exams are around 10 days or a week, then increase the duration to min. 2-3hrs a day. U can chk the priority lists or one month practice list in this blog if u needed further help on topic selection.

      Delete
  19. bhanu sir good evening i have completed the numerical ques paper u have given but i found myself little bit weak in the question like'' A block of wood in the form of a cuboid 6cm × 4cm × 4cm has all its six faces painted pink. If the wooden block is cut into 96 cubes of 1cm × 1cm × 1cm, how many of these would have pink paint on them? ''
    so how i cover these questions ..plz help me out sir

    ReplyDelete
    Replies
    1. study non verbal topics. You can find such ques online also in any online apti or quiz websites. I think I've shared them already in uceed reasource page.

      Delete
  20. bhanu sir how one should be confident on his answer in NAT PART in UCEED

    ReplyDelete
    Replies
    1. the moment u answered some ques, it mean u r confident of that. If not confident, spend little more time (within the set time) n if at least u get 70% positiveness, then go with that, else don't answer if it has negative marking.

      Delete
  21. Hello I have a doubt about question no 31 I don't think option C is a right answer because distance between 4 and 5 is not equal to distance between 5 and 6, so if option C was correct then there should have been a thin black line at the left end. Correct me if am wrong.

    ReplyDelete
  22. Can someone please provide the correct solution for question number 16?

    ReplyDelete
    Replies
    1. out of all the combinations, the combinations which add up to 7 or more are
      (5,2), (5,3), (5,4), (5,5)
      (4,3), (4,4), (4,5)
      (3,4), (3,5)
      (2,5)
      And their respective probabilities will be 1/6x1/4 , 1/6x1/4, 1/3x1/4 and so on
      So total probabity = Sum of all probabilities = 1/24+1/24+1/12+1/12+1/24+1/12+1/12+1/12+1/12+1/12= 17/24 = 0.708

      Delete
    2. How you have calculated the individual probabilities??? Pls. Help

      Delete
  23. Really helpful sir......I was searching for a website like this only it's really helpful . πŸ˜ƒ

    ReplyDelete
  24. Can anyone tell , in Q11 why K is included in the answer . I think K would overlap fig.1 easily

    ReplyDelete
  25. Any resources for 21st type questions plz

    ReplyDelete
    Replies
    1. plenty available. Have u ever tried resource page of this blog?

      Delete
  26. sir in Q3 just count the no of edges

    ReplyDelete
    Replies
    1. can u give clear explanation ? no of edges means which part ?

      Delete
    2. Just counting the vertices will do as no. of vertices= no. of sides

      Delete
  27. Hello sir,

    What is the logic behind Q34.

    ReplyDelete
  28. hello sir what is the logic for Q20

    ReplyDelete
    Replies
    1. Since the corners of the cube are touching the hemisphere the length from the center to the opposite corners should be the radius of the hemisphere. Since the ladder is placed from the center to the opposite corner piece, it also has the same length as the radius, thus making the length of the ladder 10 m. Hope this helped.

      Delete
  29. Sir in Q10 can the side of the fans blade also be considered as a circle when it rotates

    ReplyDelete
  30. Sir, Question 83, How do we know that black tin conducts the most heat?

    ReplyDelete
  31. In Question number 58,I have a counter for the option B as in option D there are unequal number of bright and dark patches at the intersection points(i.e 1&3) whereas in all the other options there are equal number of bright and dark patches(i.e 2&2)

    ReplyDelete
  32. are all the answers perfectly correct?

    ReplyDelete
  33. dear sir, for Q13 i can visualize 11 triangles according to the requirements.is it possible??

    ReplyDelete
  34. Sir,in Q13 i can visualize 11 triangles according to the requirements of the question. Am I right?

    ReplyDelete
  35. I think reaching B is possible as well in Q. 82. I'm not being able to upload an image here, else I would have sent you and image of a possible path.

    ReplyDelete
  36. Sir in question 13 there should be 11 triangles. One triangle is being made from the following circles: line 3 no.2 from right, line 6 no. 2 and 5 from right

    ReplyDelete
  37. Sir,why cant Q no.61 have A as its answer?i cannot differ between A and D.Whats the difference?

    ReplyDelete
  38. sir, in question no. 30 i didnot get how option A comes as the answer.. could u pls show me if posiible?

    ReplyDelete
  39. sir, in question no.30 i didnt quite get how first option comes..maybe my lack of imagination but could u please show me again if possible?

    ReplyDelete
  40. In question 8
    Your answer is wrong.
    Those 11 letters According to question are: A H I M O T U V W X Y

    ReplyDelete
  41. In question number 12 why do we rotate gear A anticlacke

    ReplyDelete
  42. sir in que 76 option c is also right

    ReplyDelete
  43. Q 13 there are 11 triangles there s a huge triangle from right hand side corner.

    ReplyDelete
  44. can somebody pls explain ques 32 to me

    ReplyDelete
  45. Q3. count no. of corners
    no. of corners =no.of sides

    ReplyDelete
  46. Sir in qs 1 i am not able to understand what have they asked us exactly?
    Also what should i do to understand the qs which i dont understand?

    ReplyDelete
    Replies
    1. Understanding ques and understanding what is actually to be solved is very important in any competitve exam. I believe it was you who has asked Q6 doubt below. This shows that you need some practice on 'understanding the question'. Try to read thrice or even five times - write down 'given' and 'to be found' for all the questions that you solve. This might help you understand and solve such ques. This will take some time but you definitely need this exercise to be done. For Q1, they have given one solid cube with the sides colored in green or orange. How they have colored is explained using the four images shown in the ques. It's actually one cube shown in four different views (try to learn the different views of solids and how to deal with that - you can check uceed resource page for mathematical geometry part), Given that solid, if we slice it to get 64 cubes of dim given by them, then How many of the small cubes will
      have exactly one green face and exactly one orange face in the same cube? Here you should understand that the internal solid is either colorless or say white color. So, only the six surfaces visible in the actual big cube given in the question will have colors while the internal slices won't have any color. I hope you can now solve it.
      It's like for example you take a brick and color all the surface with say white. Now break the brick in the middle and what do you see in the sliced surfaces? the usual brick color of red, right?

      Delete
  47. Sir in qs no.6 how do we come to know that the amount falls after five more combinations only and that to on 9th sep ?

    ReplyDelete
    Replies
    1. The question being asked is
      "How much is the discount for a purchase of Rupees 75,000?"

      The first step that I did above was in finding at what step 75000 falls given only 5 steps ending with 4801, and using the series that I've shown, It was found that it's the 9th step with step difference of 38,400. For this 9th step, we finally find the discount.

      Delete
  48. For ques 13 answer should 9 because first red triangle is totally wrong.

    ReplyDelete
  49. i am thankful to you .thanks for providing the solutions

    ReplyDelete
  50. In question no. 11, why is K and R not considered? I think it perfectly overlap fig.1

    ReplyDelete
  51. sir,in 17th question they mentioned"non contigous surfaces".I googled it ,it means surfaces without sharing any edge with surfaces.

    ReplyDelete
  52. In question 77 can't option D be the answer if we rearrange the blocks?

    ReplyDelete
  53. Sir can u plz explain question 20 ..How ab can be the radius?

    ReplyDelete
  54. In question no. 20 can you please give more explanation

    ReplyDelete
  55. Answer for 35 is wrong.... Ozone is a greenhouse gas

    ReplyDelete
  56. Can you please explain questions 15and 17 again. I am not able to make this question.

    ReplyDelete
    Replies
    1. I've included a image with the walls highlighted (hatched) in color for 17. Try if you can count the surfaces now. Q15, I will see if i can cover that in a video

      Delete
  57. Hi bhanu, i tried to understand your explanation of the 18th question of uceed 2017, and after spending hours on it I'm still not getting the method...it would be really helpful if you took it up in one of your videos...
    Regards, nikki

    ReplyDelete
    Replies
    1. I've updated the answer above and you can check if that clears your doubt.

      Delete
    2. otherwise, i can take that in a video.

      Delete
  58. Hi sir just thought this would be helpful..in the 3rd question an easy trick is to count the number of. edges in the broken pieces which is 7..simply they are equal to the no. of sides of the polygon I realized this while solving the paper..you may consider it if you please do correct me if I'm wrong πŸ™‡πŸΌπŸ™‡πŸΌ

    ReplyDelete
  59. Hi Sir 74 questions i don't understand

    ReplyDelete
  60. Sir, can u please explain questions no 32.

    ReplyDelete
  61. Please explain question number 36

    ReplyDelete
  62. IN ques no.13 , the answer is 9 because the small triangle in middle top doesnot have all it's corners made by circles . only two corners are made by circles . If you read the question carefully , u will get that it said corners not the vertices made by circles .

    ReplyDelete
  63. Pls can you help me out with Q85? Where can i get to know about Islamic structures?

    ReplyDelete
  64. sir, in question no.61 option A and D seem to be very similar. Can you please explain why the answer cannot be option A?

    ReplyDelete
  65. In qn 11 we can visualuze J,K, etc also right?

    ReplyDelete
  66. sir, can you explain 18th qn?

    ReplyDelete
  67. One of the blue triangles in question 13 is wrong

    ReplyDelete
  68. Sir, can you please explain Q.30. once? How was A wrong, I am unable to visualise it properly.

    ReplyDelete
  69. Is there any specific trick to solve figure counting questions like Q.2?


    ReplyDelete
  70. sir i dont understand why A cant be the ans for 64 ques.
    in ques 61 Aand D are exactly same so how do i know which is correct.

    ReplyDelete
  71. Doubt in question 12 how ten rotation

    ReplyDelete
  72. Bhanu sir please update the qs.17 answer. I have found the answer online but i cant understand it. please respond asap.

    ReplyDelete

Your comment will be sent to Bhanu for his approval. It will get published after his approval. You will receive mail for all the replies to your comment.